Jis Jsw 0.125mm To 3.5mm Flat Galvanised Sheets

Hot Dipped Galvanized – sheet or strip steel bathed in a molten solution containing not less than 98% pure zinc to uniformly coat for corrosion resistance. The coating is not intended to withstand outdoor exposure without chemical treatment or painting. Sheets are produced as commercial quality, drawing quality, drawing quality special killed, structural, physical quality, and are available in regular spangle, minimized spangle, and zinc-iron alloy.

Galvanized steel is a hot-dipped coated metal that provides customers with better resistance to corrosive environments. To create galvanized steel, cold rolled steel is submerged into a molten zinc bath, known as the hot-dip process (galvanization can also be achieved through continuous galvanizing). When the material is removed from the zinc bath and cooled a reaction to the oxygen in the air occurs. The reaction causes the zinc coating to become part of the steel creating the well-recognized spangled finish.

Galvanized Steel Sheet: a thin steel sheet that immerses the steel sheet into the molten zinc bath to make its surface adhere with a layer of zinc. It is mainly produced by continuous galvanizing process, that is, the rolled steel plate is continuously immersed in the zinc melting bath to make galvanized steel plate; Alloyed galvanized steel sheet. This kind of steel plate is also made by hot dip method, but it is heated to about 500 ℃ immediately after coming out of the groove to form an alloy coating of zinc and iron. The galvanized coil has good coating adhesion and weldability.

Galvanized steel is a hot-dipped coated metal that provides customers with better resistance to corrosive environments. To create galvanized steel, cold rolled steel is submerged into a molten zinc bath, known as the hot-dip process (galvanization can also be achieved through continuous galvanizing). When the material is removed from the zinc bath and cooled a reaction to the oxygen in the air occurs. The reaction causes the zinc coating to become part of the steel creating the well-recognized spangled finish.

301 Stainless Steel is an austenitic chromium-nickel stainless steel that provides high strength and good ductility when cold worked. The chromium and nickel contents are lowered to increase the cold work-hardening rate. This generates higher tensile strengths when cold rolled with a lower loss of ductility than with Types 302 and 304. The grade is essentially non-magnetic when annealed. When cold worked, it becomes slightly more magnetic than other standard austenitic stainless steels. WanJuan Steel is your stainless steel distributor for 301 Stainless Steel.

Grain oriented electrical steel is an important material in the production of energy efficient transformers and large, high performance generators. In the form of laminated, wound or punched sheets, it is the essential core material of distribution transformers, power transformers and small transformers.

The coated steel sheet we make into our roof cladding are produced in accordance with a strict series of quality standards by leading suppliers, giving us traceability and quality control. The durability of this roof cladding material is dependent on the galvanised and protective coatings applied to roofing substrate and fenicing substrate. As a roofing sheets material, steel has long been used in building and has the added benefit of being recyclable. To produce our high quality pre-coated roof cladding sheets, a system of multi-layer coatings is applied to the zinc-coated high tensile steel strip and then oven-cured to ensure optimum adhesion. This gives roofing sheets with excellent corrosion resistance and climatic protection together with abrasion resistance and a strong structure.